Active Emulation - Printronix P5000 Series Setup Manual

Chapter 4

ACTIVE EMULATION

ACTIVE EMULATION
ACTIVE
EMULATION
LG* LinePrinter+
The ACTIVE EMULATION menu allows you to select the emulation to be
used with your DEC LG Emulation printer. Digital LG is the default active
emulation. You can also select LinePrinter Plus as the active emulation. The
Proprinter XL, Epson FX, and P-Series emulations are all part of LinePrinter
Plus. You may configure options for the active emulation via the EMULATION
menu, described on page 73.
If the IGP/PGL or IGP/VGL graphics upgrade option is installed, the display
looks somewhat different, as follows:
•
If IGP/PGL is installed, only the following option displays:
"IGP/PGL & LP+"
•
If IGP/VGL is installed, only the following option displays:
"IGP/VGL & LP+"
NOTE: When you change from LG to LinePrinter Plus (or from LinePrinter
72
IGP/PGL
IGP/VGL
1
& LP+ & LP+
To view options, press:
To select an option, press ENTER.
To return to main menu, press
CLEAR.
To exit menu, press ONLINE.
* = Default Setting
1
= if installed
Plus to LG) as your active emulation, the power-up configuration is
loaded for the new active emulation. (If no power-up configuration
has been defined, the factory default configuration is loaded.)
1
⇓
Down
⇑
Up
⇒
Next
⇐
Prev