Adjusting The Position Of The Headrest Or Neckrest; Adjusting The Height Of The Headrest Or Neckrest; Adjusting And Removing The Tray - Invacare Fox User Manual

5.10.1 Adjusting the position of the headrest or
neckrest
The adjustment of the position is the same for all headrests and
neckrests.
Tools:
•
5 mm Allen key
Loosen the screws A , B or the clamping lever C.
1.
2. Adjust the headrest or neckrest to the required position.
3. Retighten screws and clamping lever.
4. Loosen the Allen screw D.
5. Slide the headrest left or right to the required position.
6. Retighten the Allen screw.
5.10.2 Adjusting the height of the headrest or
neckrest
The adjustment of the height is the same for all headrests and
neckrests.
1577074-B
Adjusting the mobility device to the user's seating posture
1. Loosen knob A.
2. Adjust headrest or neckrest to required height.
3. Retighten knob.

5.11 Adjusting and removing the tray

CAUTION!
Injury hazard or material damage if a mobility
device which is fitted with a table is transported
in a vehicle
– If a table is fitted, always remove it before transporting
the mobility device.
29