SiUS281117
Mode changing procedure
Mode changing procedure
Press BS1 (MODE) for more than 5 sec.
Setting mode 2
Setting item selection (Set)
Press BS3 (RETURN) once.
Setting condition
selection (Set)
Press BS3 (RETURN) once.
Setting condition
(Contents) display
Press BS3 (RETURN) once.
Press BS1 (MODE) once.
82
Using the MODE button, the modes can be changed as follows.
Press and hold the BS1
(MODE) for 5 seconds.
Setting mode 2
Press the BS1 (MODE) once.
MODE
ON
H1P
Setting mode 1
(Initial condition)
(Normal)
Press the BS1 (MODE)
once.
Setting mode 1
MODE
OFF
H1P
(Set): Select mode with BS2 (SET) in each selection step.
Press BS1 (MODE) once.
Monitor mode
Check item selection (Set)
Press BS3 (RETURN) once.
Contents display
Press BS3 (RETURN) once.
Field Setting from Outdoor Unit
Monitor mode
MODE
Blinking
H1P
Press BS1 (MODE) once.
Field Setting