Daikin SkyAir RZR-P Series Service Manual page 84

Field Setting from Remote Controller
Auto Restart after Power Failure Reset
For the air conditioners with no setting for the function, the units will be left in the stop condition
when the power supply is reset automatically after power failure reset or the main power supply
is turned ON again after once turned OFF. However, for the air conditioners with the setting
(same as factory setting), the units may start automatically after power failure reset or the main
power supply turned ON again (return to the same operation condition as that of before power
failure).
For the above reasons, when the unit is set enabling to utilize "Auto restart function after power
failure reset", utmost care should be paid for the occurrence of the following situation.
Caution 1. The air conditioner starts operation suddenly after power failure reset or
2. For example, during service work, turning OFF the main power switch while
Setting of Airflow Direction Adjustment Range
Make the following airflow direction setting according to the respective purpose.
Field Setting
the main power supply is turned ON again. This could be unexpected to
the user and cause concern.
the unit is operating, and turning ON the switch again after the work is
completed, starts unit operation (the fan rotates).
Mode No. First Code No.
13 (23)
Second Code No.
01
02
4
03
SiUS281117
Setting
Upward (Draft prevention)
Standard
Downward (Ceiling soiling
prevention)
77