Daikin SkyAir RZR-P Series Service Manual page 78

Field Setting from Remote Controller
2.1.2 BRC1E71
1
Press and hold Cancel button for
4 seconds or more.
Service settings menu is
displayed.
2
Select Field Settings
Service Settings menu, and
press Menu/OK button.
Field settings screen is
displayed.
3
Highlight the mode, and select
desired "Mode No." by using
(Up/Down) button.
4
In the case of setting per indoor
unit during group control (When
Mode No. such as
22 , 23 , 25 are selected),
highlight the unit No. and select
"Indoor unit No." to be set by
using (Up/Down) button.
(In the case of group total setting,
this operation is not needed.)
In the case of individual setting
per indoor unit, current settings
are displayed. And, SECOND
CODE NO. " - " means no
function.
5
Highlight SECOND CODE NO. of
the FIRST CODE NO. to be
changed, and select desired
"SECOND CODE NO." by using
(Up/Down) button. Multiple
identical mode number settings
are available.
In case of setting for all indoor
units in the remote control
group, available SECOND
CODE NO. is displayed as " ∗ "
which means it can be
changed.
When SECOND CODE NO. is
displayed as " - ", there is no
function.
Field Setting
in the
20 , 21 ,
In the case of individual
3
4
5
<Basic screen>
1
Fan
Press and hold Cancel
button for 4 seconds or
more during backlight lit.
<Service Settings menu screen>
2
Service Settings
Test Operation
Maintenance Contact
Field Settings
Energy Saving Options
Prohibit Buttons
Min Setpoints Differential
Setting
Press Menu/OK button.
<Service Settings screen>
setting per indoor unit
Field Settings
Unit No Mode
0 20
0–01 1–01 2–02 3–01
4––– 5––– 6––– 7–––
8––– 9––– a––– b–––
Setting
Press Menu/OK button.
SiUS281117
1/3
In the case of group total
setting
3
Field Settings
Mode
5
10
0 – 1 –
01 2– 3–
4 ––– 5 ––– 6 ––– 7 –––
8 ––– 9 ––– a ––– b –––
Setting
SECOND CODE NO.
FIRST CODE (SW) NO.
71