Connecting; Operating The Sidoor Support App - Siemens SIDOOR ATD4 W Series System Manual

8.2.2

Connecting

1. Connect the SIDOOR LINK to plug connector X8 of the SIDOOR control unit using the
corresponding cable.
2. Install the SIDOOR SUPPORT app on the Android smartphone/tablet (min. Android version 9
with Bluetooth LE 5.0).
NOTICE
Material damage
Connect the SIDOOR LINK to the X8 plug of the SIDOOR control unit using only the cable
supplied.
8.2.3

Operating the SIDOOR SUPPORT app

Requirements
The following requirements must be met in order to use all functions of the SIDOOR SUPPORT
app:
• You have assigned a 4-digit PIN during initial commissioning.
• You have registered the serial number of the SIDOOR LINK in the SIDOOR SUPPORT app.
Procedure
1. Start the SIDOOR SUPPORT app.
A list with all accessible SIDOOR LINK adapters appears in the SIDOOR SUPPORT app.
2. Select a SIDOOR LINK adapter.
A Bluetooth connection is then established between the Android smartphone / tablet and
SIDOOR LINK.
Functions
The SIDOOR SUPPORT app offers the following functions:
Function
Displaying, saving and comparing service data
Display of the SIDOOR status (7-segment display)
Emulation of the Service Tool function
ATD4xxW for industrial applications
System Manual, 06/2022, A5E51901827B AA
8.2 SIDOOR LINK and SIDOOR SUPPORT App
Description
• Operating hours
• Openings
• Learn runs
• Power failures
• Obstructions
• Driving curve parameters
with detailed explanations
See SIDOOR SERVICE TOOL (Page 271)
Optional additional units
281