Bearing Pointers And Information Windows - Garmin G3X Pilot's Manual

HSI ANNUNCIATIONS
NOTE: Some or all HSI annunciations may appear in the four quadrants of the
G3X HSI depending on the external navigator(s) configured (i.e., SL30 Nav/
Comm Transceiver and/or the GTN or GNS Series Units).
'1' or '2' will appear
after the Naviga-
tion Source if more
than one external
navigation source is
LOI: Loss of GPS integrity.
VFR: An external GPS source is
configured but there is not enough
guidance data for IFR use.
REV: External Navigation Source
failed. Reverted to internal VFR
GPS for navigation.
MSG: External navigation source
has a pending message
INT: The pilot has elected to
use the internal GPS navigation
source instead of the external GPS
navigation source.

BEARING POINTERS AND INFORMATION WINDOWS

Two bearing pointers and associated information can be displayed on the HSI for
NAV (VOR, Localizer) and GPS sources as well as nearest airports. The bearing pointers
are light blue and are single-line (Bearing Pointer 1) or double-line (Bearing Pointer
2). A pointer symbol is shown in the information windows to indicate the navigation
source. The bearing pointers never override the CDI and are visually separated from the
CDI by a white ring (shown when the bearing pointers are selected but not necessarily
visible due to data unavailability).
190-01115-00 Rev. G
Navigation
Source: GPS
or NAV (VOR,
configured.
Localizer)
LOI, VFR,
REV, MSG,
or INT
Garmin G3X Pilot's Guide
VFR CDI scale
Flight Phase
OBS
HSI Annunciations
Flight Instruments
VFR CDI Scales:
0.25nm, 1.25nm,
5.00nm
Flight Phase
(IFR): APR, TERM,
ENR, OCN, LNAV,
L/VNAV, LNAV+V,
or LPV
73