Switching From Standby Mode To Operating Mode - Garmin G3X Pilot's Manual

Hazard Avoidance
Switching from operating mode to standby mode:
On the Traffic Page, select the STANDBY Softkey

Switching from standby mode to operating mode:

On the Traffic Page, press the OPERATE Softkey
Changing the altitude range:
1) On the Traffic Page, select the ALT MODE Softkey.
2) Press one of the following Softkeys:
• ABOVE: Displays non-threat and proximity traffic from 9000 feet
above the aircraft to 2700 feet below the aircraft. Typically used during
climb phase of flight.
• NORMAL: Displays non-threat and proximity traffic from 2700 feet
above the aircraft to 2700 feet below the aircraft. Typically used during
enroute phase of flight.
• BELOW: Displays non-threat and proximity traffic from 2700 feet
above the aircraft to 9000 feet below the aircraft. Typically used during
descent phase of flight.
• UNREST (unrestricted): All traffic is displayed from 9900 feet above
and 9900 feet below the aircraft.
3) To return to the Traffic Page, press the BACK Softkey.
FLIGHT ID DISPLAY
The Flight IDs of other aircraft (when available) can be enabled for display on the
Traffic Map Page. When a flight ID is received, it will appear above or below the
corresponding traffic symbol on the Traffic Map Page when this option is enabled.
Enabling/Disabling Flight ID Display:
On the Traffic Map Page, press the FLT ID Softkey.
218
Garmin G3X Pilot's Guide 190-01115-00 Rev. G