Garmin G3X Pilot's Manual page 269

Device Softkeys
ON/OFF
TRIM UP/TRIM DN
TRIM L/TRIM R
FLAPS UP/FLAP DN
AUTO
RESET
Selecting and controlling an electrical device from the list:
1) With the VP-X Page displayed, press the FMS Joystick to activate the cursor.
2) Move the FMS Joystick to highlight the desired device.
3) Using the device sensitive softkeys select the desired function.
Or:
Select 'RESET' to reset a faulted device.
190-01115-00 Rev. G
Device sensitive softkeys for devices such as; Fuel Pump, Landing
light, or anything else that would have an on/off type function.
Device sensitive softkeys for Pitch Trim devices.
Device sensitive softkeys for Roll Trim devices.
Device sensitive softkeys for a Flap motor.
Only appears when the landing light(s) have been configured
to 'wig-wag'. When AUTO (default) is selected the VP-X will
automatically pulse (wig-wag) the landing lights based on the
current phase of flight. When AUTO is not selected the landing
lights will remain steady-on (no wig-wag).
Only appears when the selected device is in a fault condition. By
selecting 'RESET' the VP-X will attempt to clear the fault (similar
to resetting the circuit breaker).
Device Sensitive Softkeys
Garmin G3X Pilot's Guide
Additional Features
Description
251