Pfd Display Configuration - Garmin G3X Pilot's Manual

System Overview
• Multi-Display (Normal Mode)
– In normal mode an example Multi-Display system includes a pilot-side PFD
(PFD1), MFD, and co-pilot side PFD (PFD2). PFD1 can also be configured as a
split-screen. PFD2 can be configured as a split-screen or PFD/MFD (full-screen
PFD page and full-screen MFD pages without split-screen)
PFD1
• Multi-Display (Reversionary Mode)
If the system detects a failure in PFD1, the MFD enters reversionary mode. If the
MFD fails, PFD1 and PFD2 enter reversionary mode. A failure of PFD2 is not considered
an emergency and will not cause either of the remaining displays to enter reversionary
mode.

PFD DISPLAY CONFIGURATION

If the system is configured for multiple GDUs, the pilot has the ability to change the
layout of PFD1 between full-screen and split-screen in normal mode.
Changing the PFD1 Display Layout:
1) Press the MENU Key twice to display the Main Menu.
2) Turn or move the FMS Joystick to highlight 'System Setup...' and press the
ENT Key.
3) Turn or move the FMS Joystick to highlight 'Display', and press the ENT
Key.
16
MFD
G3X Multi-display Normal Mode (example)
Garmin G3X Pilot's Guide
PFD2
190-01115-00 Rev. G