Transponder - Garmin G3X Pilot's Manual

System Overview
Restoring system setting defaults:
1) Press the MENU Key twice to display the Main Menu.
2) Turn or move the FMS Joystick to highlight 'System Setup...' and press the
ENT Key.
3) Turn or move the FMS Joystick to highlight the desired menu option (Data
Bar Fields, Display, Date & Time, Position, or Alarms), and press the ENT
Key.
4) Press the MENU Key.
5) With 'Restore Default' highlighted press the ENT Key.

TRANSPONDER

If configured to 'Set By Pilot' in configuration mode, (refer to the Installation Manual
for configuration information) the pilot can change the Flight ID and enable/disable
ADS-B Transmit from the Transponder Setup Page.
Setting the Flight ID:
1) Press the MENU Key twice to display the Main Menu.
2) Turn or move the FMS Joystick to highlight 'System Setup...' and press the
ENT Key.
3) Turn or move the FMS Joystick to highlight 'Transponder', and press the
ENT Key.
4) Move the FMS Joystick to highlight the 'Flight ID' Field.
5) Use the FMS Joystick to enter the desired Flight ID and press the ENT Key.
Enabling/disabling ADS-B Transmit:
1) Press the MENU Key twice to display the Main Menu.
2) Turn or move the FMS Joystick to highlight 'System Setup...' and press the
ENT Key.
3) Turn or move the FMS Joystick to highlight 'Transponder', and press the
ENT Key.
4) Move the FMS Joystick to highlight the 'ADS-B Transmit' Field.
5) Turn the FMS Joystick to highlight 'Enabled' or 'Disabled'.
6) Press the FMS Joystick, the CLR Key, the EXIT Softkey or the MENU Key to
return to the previous page.
46
Garmin G3X Pilot's Guide 190-01115-00 Rev. G