Waypoint—Enter any waypoint along the currently active route as the
•
reference waypoint. The reference waypoint defines the target location.
Profile—Enter the descent rate.
•
Altitude—Enter the desired reference waypoint altitude. Select 'Above
•
Waypoint' to use field elevation for airports in the Jeppesen database or 'MSL'
to specify an exact MSL altitude target.
By—Enter the target location with settings of distance 'Before' or 'After' a
•
reference waypoint. To set a target location at a reference waypoint, enter a
distance of zero.
VNAV Messages—Select 'On' or 'Off' to enable/disable VNAV alert messages.
•
Enabling/disabling the VNAV indicator:
1) From the full-screen PFD and/or the split-screen PFD Page, press the MENU
Key.
2) Move the FMS Joystick to highlight the VNAV Indicator field.
3) Turn the FMS Joystick to highlight 'On' or 'Off'.
Force capture of the VNAV profile:
1) Enter a valid VNAV profile and begin navigation.
2) Press the FPL Key.
3) Turn the FMS Joystick to highlight the Vertical Navigation Page.
4) Press the MENU Key.
190-01115-00 Rev. G
Vertical Navigation Page (Split-Screen)
Garmin G3X Pilot's Guide
Flight Instruments
91