G3X System Annunciations - Garmin G3X Pilot's Manual

4) Move the FMS Joystick to highlight the PFD Display Layout field.
5) Turn the FMS Joystick to highlight 'Auto' or 'Split'.
6) Press the FMS Joystick, the CLR Key, the EXIT Softkey or the MENU Key to
return to the previous page.
Changing the PFD2 Display Layout:
If the system is configured for multiple GDUs, the pilot has the ability to change the
layout of PFD2 between full-screen PFD, split-screen, or full-screen PFD/MFD.
1) Press the MENU Key twice to display the Main Menu.
2) Turn or move the FMS Joystick to highlight 'System Setup...' and press the
ENT Key.
3) Turn or move the FMS Joystick to highlight 'Display', and press the ENT
Key.
4) Move the FMS Joystick to highlight the PFD2 Display Layout field.
5) Turn the FMS Joystick to highlight 'Auto', 'Split', or 'PFD/MFD'.
6) Press the FMS Joystick, the CLR Key, the EXIT Softkey or the MENU Key to
return to the previous page.

G3X SYSTEM ANNUNCIATIONS

When an LRU or an LRU function fails, a large red 'X' is typically displayed over
the instrument(s) or data experiencing the failure (Refer to Appendix F, Abnormal
Operation). Upon G3X power-up, certain instruments remain invalid as equipment
begins to initialize. All instruments should be operational within one minute of power-
up. If any instrument remains flagged, and it is not likely an installation related
problem, the G3X should be serviced by a Garmin-authorized repair facility .
190-01115-00 Rev. G
PFD Initialization
Garmin G3X Pilot's Guide
System Overview
17