Adjusting The Course Pointer; Hsi Bearing Pointers - Garmin G500 Reference Manual

PRIMARY FLIGHT DISPLAY (PFD)
NOTE: If magnetic heading is lost, GPS ground track will be displayed
in place of heading.

Adjusting the Course Pointer

Press the CRS key and turn the PFD knob to select a course for a VOR/ILS or
OBS mode course.

HSI Bearing Pointers

NOTE: The Bearing Pointer for navigation source 1 (BRG1) will be an
arrow with a single line. The Bearing Pointer for navigation source 2
(BRG2) will be an arrow with a double line.
To toggle between the available bearing pointers, press the PFD soft key, then
the BRG soft key, and then the BRG1 or BRG2 soft keys.
The BRG1 soft key cycles through modes NAV1 and GPS1. Additionally, ADF
is available if an ADF source is installed.
The BRG2 soft key cycles through modes, NAV2 and GPS2 if a second NAV
or GPS source is available. Additionally, ADF is available if an ADF source is
installed.
14
Current Heading
Current GPS Track
HSI Heading Markings
G500/G600 Cockpit Reference Guide
Turn Rate Markings
Heading Trend
190-00601-03 Rev H