System Operation; Split Mode; Pfd Display Configuration; G3X Touch System Annunciations - Garmin G3X Touch Pilot's Manual

1.5 SYSTEM OPERATION

NOTE: Refer to the G3X Touch Installation Manual for information on con-
figuring the displays).

SPLIT MODE

Press Split or Full in the upper left or right hand corner of the display
to toggle between split and full screen.

PFD DISPLAY CONFIGURATION

Changing the PFD Display Layout:
1) Press the MENU Key twice to display the Main Menu.
2) Touch Setup > Display.
3) In the PFD Display Layout field, touch Auto or Split.
Changing the PFD Split Screen Side:
1) Press the MENU Key twice to display the Main Menu.
2) Touch Setup > Display.
3) In the PFD Split Screen Side field, touch Left or Right.

G3X TOUCH SYSTEM ANNUNCIATIONS

When an LRU or an LRU function fails, a large red 'X' is typically displayed over the
instrument(s) or data experiencing the failure. Upon G3X Touch power-up, certain
instruments remain invalid as equipment begins to initialize. All instruments should be
operational within one minute of power-up. If any instrument remains flagged, and
it is not likely an installation related problem, the G3X Touch should be serviced by a
Garmin-authorized repair facility .
190-01754-00 Rev. A Garmin G3X Touch Pilot's Guide
System Overview
11