Simultaneously press and hold both temperature buttons until the hours jump to 00000.
The service message disappears from the display.
Note! Press the right buttons! Simultaneously pressing the power buttons will cause the parameters to reset to the
settings of the software manufacturer. These settings are completely different from the pellet stove parameters.
9.1.7
Reading the fire cycle
Read the current operating timers of the stove and the duration of the cycle involved right now.
Go to the 'Vc Vf Va Pi Time' screen.
This is where you can read on the Pi position (related to Power 1 to 5) at which the stove currently operates.
Page 16 of 28