Stanley Lir LIR500 Installation And Operating Instructions Manual page 3

11 MAINTENANCE OPERATIONS .......................................................................................................................................... 18
12 PROBLEMS AND SOLUTIONS ........................................................................................................................................... 22
13 FAULT REPORTS AND SOLUTIONS.................................................................................................................................... 22
13.1.1 ERROR 1 ................................................................................................................................................................ 22
13.1.2 ERROR 5 ................................................................................................................................................................ 22
13.1.3 ERROR 6 ................................................................................................................................................................ 22
13.1.4 ERROR 8 ................................................................................................................................................................ 22
13.1.5 ERROR 9 ................................................................................................................................................................ 22
13.1.6 'Service' ................................................................................................................................................................ 23
13.1.7 It's becoming too hot in the house ....................................................................................................................... 23
14 EXPLODED VIEW STANLEY LIR ......................................................................................................................................... 24
15 SPARE PART NUMBER AND DESCRIPTION ....................................................................................................................... 25
16 ELECTRICAL DIAGRAM OF THE STANLEY LIR PELLET STOVE .............................................................................................. 26
17 CONNECTOR TABLE ......................................................................................................................................................... 27
The Clean Air Act 1993 and Smoke Control Areas
Under the Clean Air Act local authorities may declare the whole or part of the district of the authority to be a smoke control area. It is
an offence to emit smoke from a chimney of a building, from a furnace or from any fixed boiler if located in a designated smoke
control area. It is also an offence to acquire
an "unauthorised fuel" for use within a smoke control area unless it is used in an "exempt" appliance ("exempted" from the controls
which generally apply in the smoke control area). In England appliances are exempted by publication on a list by the Secretary of
State in accordance with changes made to sections 20 and 21 of the Clean Air Act 1993 by section 15 of the Deregulation Act 2015.
Similarly in Scotland appliances are exempted by publication on a list by Scottish Ministers under section 50 of the Regulatory
Reform (Scotland) Act 2014. In Wales and Northern Ireland these are authorised by regulations made by Welsh Ministers and by the
Department of the Environment respectively.
Further information on the requirements of the Clean Air Act can be found
here at:
https://www.gov.uk/smoke-control-area-rules
Your local authority is responsible for implementing the Clean Air Act 1993 including designation and supervision of smoke control
areas and you can contact them for details of Clean Air Act requirements.
The Stanley Lir 5kW has been recommended as suitable for use in smoke control areas when burning wood pellets of diameter 6
mm ranging in length from 10mm- 30mm, the pellets must conform to the EN plus standard class A1
Thank you for purchasing a Waterford Stanley Wood pellet Stove.
Please read this manual carefully and retain it for future reference.
These products fulfil the requirements of the Construction Products Regulation and have been approved with the CE
conformity mark;
WATERFORD STANLEY bears no responsibility for any damage to the stove if it is installed by non-qualified personnel;
WATERFORD STANLEY is not responsible for any damage to stoves not installed and used in compliance to the
instructions included in this manual;
All local regulations, national and European standards, must be observed when installing, operating and servicing the stove;
Whenever you need assistance, you should contact your stove's supplier or installer. You must have the wood pellet stove serial
number located over the identification plate.
The product must be commissioned by a Waterford Stanley approved service engineer.
Page 3 of 28
.