Figure 45
1. Spring-loaded idler pulley
2. Short-hook end
9.
Install the belt onto the spring-loaded idler pulley
(Figure
44).
Checking and Adjusting the
Blower Latch
Close the blower assembly to see if the latches are
adjusted correctly. Loosen or tighten the bolts so that
the latches firmly hold the blower assembly against
the mower deck but can be released by hand.
Figure 46
1. Latch
2. Bolt
Greasing the Idler Arm
Service Interval: Every 50 hours
Grease the bagger belt idler arm
50 hours.
g003776
3. Long-hook end
g003400
3. Blower assembly
(Figure
47) every
29
Figure 47
g003455