IBM Elastic Storage System 3200 Hardware Planning And Installation Manual page 124

POWER9 protocol node 1 FSP
(HMC1 port) interface (bottom-
most)
Protocol node 2 management
interface (top)
POWER9 protocol node 2 FSP
(HMC1 port) interface (top)
Note: If there are additional building-blocks or POWER9 Protocol nodes, please add more tables.
POWER9 EMS (should be only one)
EMS management interface
EMS FSP (HMC1 port) interface
EMS FSP (C11-T2) interface
EMS External/Gateway IP (C11-
T3)
Recommended HMC2 port campus connection. Consider cabling this port to a public network and setting
a campus IP. This will allow remote recovery/debug of the EMS in case of an outage. The gateway may be
needed to for this IP address to work properly.
EMS HMC2 port IP
EMS HMC2 port IP gateway
Additional notes for customer / LBS:
The root password should be set for the essserv1 SSR ID to execute commands. When prompted set the
password.
Account type
Linux OS
Customer has purchased a scale license. The options are Data Access Edition (DAE) or Data Management
Edition (DME). When deciding which edition to download and copy to the /serv directory you will need this
information.
The Scale license field is only need for ESS 6130 or later.
Scale license
Note: Write down any vital information that should be shared with the customer / LBS that you
encountered during execution of Install Complete.
106 IBM Elastic Storage System 3200: Hardware Planning and Installation Guide
IP address
10.0.0.110
192.168.45.51
10.0.0.111
IP address
192.168.45.20
10.0.0.100
10.0.0.1
Account ID
root
DAE or DME
Netmask
255.255.255.0
255.255.255.0
255.255.255.0
Netmask
255.255.255.0
255.255.255.0
255.255.255.0
Password
ibmesscluster