Detailed Installation Steps (Ssr Task); Ess System View; Rack Details; Installing The Ems Server In A Rack - IBM Elastic Storage System 3200 Hardware Planning And Installation Manual

Detailed installation steps (SSR task)

This section is intended for IBM authorized service personnel only. IBM service support representatives
can access service installation information through the links in the following topics.
Note: An IBM intranet connection is required.

ESS system view

Components required to set up EMS
For information on the components required to set up EMS, see Before Installation (Sections 1 through 8)
on the IBM Worldwide Customized Installation Instructions (WCII) website.
ESS system network connection diagram
For information on the ESS system network connection diagram, see ESS network connection diagram on
the IBM Worldwide Customized Installation Instructions (WCII) website.
Management Server description and feature table
For information on the Management Server description and feature table, see 5105-22E Management
Server description and feature table on the IBM Worldwide Customized Installation Instructions (WCII)
website.
Technical and Delivery Assessments (TDAs)
For information on the Technical and Delivery Assessments (TDAs), see ESS - Technical and Delivery
Assessments (TDAs) on the IBM Worldwide Customized Installation Instructions (WCII) website.

Rack details

Prepare the rack for installation work
For information on preparing the rack for installation work, see Prepare the rack for installation work on
the IBM Worldwide Customized Installation Instructions (WCII) website.
Verify the position and installation of new system racks
For information on verifying the position and installation of new system racks, see Verify the position
and installation of new system racks on the IBM Worldwide Customized Installation Instructions (WCII)
website.

Installing the EMS server in a rack

For information about the instructions to install an EMS server on a rack, see Installing, removing and
replacing customer-installable parts.

Unpacking IBM Elastic Storage System 3200 (IBM SSR task)

Before you unpack IBM Elastic Storage System 3200, ensure that you have reviewed and followed all the
related instructions.
The IBM Elastic Storage System 3200 system and related parts are shipped preinstalled in the enclosure:
• The IBM Elastic Storage System 3200 system comes preinstalled with the following components:
– Two server canisters with adapters and memory feature codes
Chapter 4. Installing 47