Epson SureColor SC-S30600 User Manual page 87

SC-S30600 Series User's Guide
Error messages
Call For Service
XXXX Error XXXX
Power off and then on. If this doesn't work,
note the code and call for service.
Call-for-Service Request Error Codes
The portions indicated by asterisks ("*") vary depending on the type of error.
Carriage error
Media feed error
Circuit error
Ink system error
Component has reached end of
service life
Mechanical error
Heater error
Problem Solver
What to do
A call for service occurs when:
❏
The power cable is not connected securely
❏
An error that cannot be cleared occurs
When a call for service has occurred, the printer automatically stops printing. Turn
off the printer, disconnect the power cable from the outlet and from the AC inlet
on the printer, and then reconnect. Turn on the printer again multiple times.
If the same call for service is displayed on the LCD panel, contact your dealer or
EpsonSupport for assistance. Tell them the call for service code is "XXXX".
11**
12**, 15A*, 161*
00**, 13**, 1A**, 1F**, 20**, 3000, Dx**, Fx**
14**,162*
110*, 143*
15**
19**
87