Epson SureColor SC-S30600 User Manual page 76

SC-S30600 Series User's Guide
Item
Feed Adjustment
Platen Gap
Head Alignment
Heating & Drying
Using the Control Panel Menu
Parameter Explanation
Auto Use this option if banding (horizontal banding, lines, or strips of uneven
color) persists after head cleaning and head alignment have been
Manual
performed.
Auto feed adjustment adjusts the feed automatically using data collected
by a sensor while a test pattern is printed. U
page 42
In manual feed adjustment, the user visually inspects print results and
enters the adjustment value by hand. U
Adjustment)" on page 47
1.5 Choose the platen gap (the distance between the print head and the
media).
2.0
The default setting of 1.5 is recommended in most situations. Choose 2.0 if
printout is scratched or smudged. Select 2.5 only if print results are still
2.5
smudged when 2.0 is selected. Choosing a larger gap than required may
result in ink stains inside the printer, reduced print quality, or shorter
product life.
Auto(Uni-D) Select Head Alignment to align print head when print results seem grainy
or out of focus. Auto adjustment aligns the head automatically using data
Auto(Bi-D)
collected by a sensor while a test pattern is printed. U
on page 43
Manual(Uni-D)
In manual adjustment, you need to check the pattern and enter the
optimum adjustment value for alignment. U
Manual(Bi-D)
Misalignment (Head Alignment)" on page 46
76
"Feed Adjustment" on
"Feed Adjustment (Manual Feed
"Head Alignment"
"Correcting Print