Back - Epson SureColor SC-S30600 User Manual

SC-S30600 Series User's Guide

Back

A
Drive switch
The drive switch is used to feed the media during loading and to rewind the media for replacement.
B
Roll holder
Place media on these holders. There are two holders: one on the left and one on the right.
C
Roll holder fixing screw
These screws fix the roll holders in place once the media has been installed. There are two screws: one on the left and
one on the right.
D
Lift lever
If the media to be mounted on the roll holders seems heavy, use these levers to raise the media effortlessly to the
level of the roll holders. There are two lift levers: one on the left and one on the right.
E
Pre-heater
Heats the media before printing so that the print area is not subject to sudden changes in temperature.
F
Roll support
Rest media on these supports before placing it on the roll holders. There are two supports: one on the left and one on
the right.
G
Handle
After placing media on the right roll holder, rotate the handle to press the holder and apply pressure to the roll
core.
Introduction
11