Epson SureColor SC-S30600 User Manual page 10

SC-S30600 Series User's Guide
A
Print head
The print head prints by moving left and right while emitting ink. We recommend that you clean the area around
this unit once a week.
"Cleaning Around the Print Head" on page 55
U
B
Media holding plate
The media holding plates prevent the media riding up and keeps fuzz on the cut edge of the media from touching
the print head. Position the plates at either side of the media before printing.
"Loading Media" on page 22
U
C
Cutter groove
Pass the blade of a cutter (available in the market) down this groove to cut media.
D
Pressure rollers
These rollers press down on the media during printing.
"Cleaning the Platen Heater, Pressure Rollers, and Media Holding Plates" on page 50
U
E
Platen heater
The platen heater ensures that the ink adheres evenly.
"Heating & Drying" on page 43
U
"Cleaning the Platen Heater, Pressure Rollers, and Media Holding Plates" on page 50
U
F
Wiper cleaner
The wiper cleaner removes ink from the wiper. It is a consumable;replace about once every six months.
"Replacing the Wiper and Wiper Cleaner" on page 60
U
G
Caps
Except during printing, these caps cover the print head nozzles to prevent them drying out. We recommend that
the caps be cleaned once a week.
"Regular Part Cleaning" on page 55
U
H
Wiper
The wiper removes ink from the print head nozzles. We recommend that this unit be cleaned once a week. It is a
consumable;replace about once every six months.
"Regular Part Cleaning" on page 55
U
"Replacing the Wiper and Wiper Cleaner" on page 60
U
I
Flushing pad
Ink is discharged onto this pad during flushing. It is a consumable;replace about once every six months.
"Replacing the Flushing Pad" on page 61
U
Introduction
10