Table of Contents
Advertisement
To confirm that the option is installed correctly, print a configuration status sheet. See "Printing a
Configuration Status Sheet" on page 147.
Removing a memory module
Warning:
w
Be careful when working inside the printer as some components are sharp and may cause injury.
Caution:
c
Before you remove a memory module, be sure to discharge any static electricity by touching a
grounded piece of metal. Otherwise, you may damage static-sensitive components.
Perform the installation procedure in reverse.
When removing a memory module from its slot, press the clip and pull out the memory module.
Interface Card
Your printer comes with an empty type-B interface slot. Various optional interface cards are available
to expand your printer's interface options.
Installing an interface card
Caution:
c
Before you install the interface card, be sure to discharge any static electricity by touching a
grounded piece of metal. Otherwise, you may damage static-sensitive components.
1. Turn the printer off and unplug the power cord and interface cable.
Epson AcuLaser M7000 Series
Installing Options
User's Guide
113
Advertisement
Table of Contents
