Epson AcuLaser M7000N series User Manual page 86

Epson AcuLaser M7000 Series User's Guide
To clear this error, select Clear Warning from the control panel's Reset Menu. See "How to access
the control panel menus" on page 56 for instructions.
Check Paper Type
The paper loaded in the printer does not match the paper type setting in the printer driver. Paper that
matches only the paper size setting will be used for printing.
To clear this error, select Clear Warning from the control panel's Reset Menu. See "How to access
the control panel menus" on page 56 for instructions.
Clear paper jam and then reload wwww
The location where the paper jam occurred is displayed at WWWWW. WWWWW indicates the location of the
error.
If a paper jam occurs at two or more locations simultaneously, the corresponding multiple locations
are displayed.
For details about clearing paper jams, see "Clearing Jammed Paper" on page 125.
Close Cover wwww
The specified cover (wwww) does not close securely. Open the cover once, and then close.
Collate Disabled
Printing by specifying the number of copies is no longer possible due to a lack of memory (RAM). If
this error occurs, print only one copy at a time.
To clear this error, select Clear Warning from the control panel's Reset Menu. See "How to access
the control panel menus" on page 56 for instructions.
Correct time using Time Setting
The current time setting is reset because you did not connect the power cord for a long time. To clear
this error, select Time Setting from Clock Menu and specify the current date and time.
Duplex Memory Overflow
There is not enough memory for duplex printing. The printer prints only on the front and ejects the
paper. To clear this error, follow the instructions below.
Using the Control Panel 86