Epson AcuLaser M7000N series User Manual page 88

Epson AcuLaser M7000 Series User's Guide
You may need to increase the amount of printer memory to be able to print at the desired print quality
for your document. For more information on adding memory, see "Memory Module" on
page 110.
Install Toner Cartridge
The imaging cartridge is not installed in the printer.
Install the imaging cartridge. See "Replacing Consumable Products" on page 116.
Invalid AUX I/F Card
This message means that the printer cannot communicate with the installed optional interface card.
Turn off the printer, remove the card, then reinstall it.
Invalid Data
The spool file on the driver is deleted while printing or the data is abnormal. Press the Start/Stop
button to clear the error.
Invalid PS3
There are errors in the ROM module. Turn off the printer and contact your dealer.
Manual Feed ssss
The manual feed mode is specified for the current print job. Make sure the paper size indicated by
ssss is loaded, then press the Start/Stop button.
Memory Overflow
The printer has insufficient memory to execute the current task. Press the Start/Stop button on the
control panel to resume printing, or cancel the print job. To cancel the print job see "Canceling
Printing" on page 96.
Need Memory
The printer has insufficient memory to complete the current print job.
To clear this error message, select Clear Warning from the control panel's Reset Menu. See"How to
access the control panel menus" on page 56 for instructions.
To prevent this problem from recurring, add more memory to your printer as described in "Memory
modules" on page 187, or reduce the resolution of the image to be printed.
Using the Control Panel 88