Epson AcuLaser M7000N series User Manual page 83

Item
*4
Day
*1
Not available in PS3.
*2
Not available when a USB cable is connected or an optional interface card is installed.
*3
If EU is not selected as the Region Setting for the initial settings, the default value is Off.
*4
Available only when Timer Setting is set to On.
Time to Sleep
Specifies the length of the time until the printer enters the sleep mode if there are no button operations
and no jobs to be printed.
Deep Sleep Mode
When this setting is set to On, the printer switches into the deep sleep mode at the time specified in the
Time to Sleep setting if the printer is not operated or receives no jobs. In the deep sleep mode, the
Wake Up/Sleep button lights and more power is saved than when in the sleep mode. The printer
switches to the deep sleep mode only when the Apple Talk, WSD, IPv6, and IPSec settings in the
Network Setting and RAM Disk in the Setup Menu are set to Off.
To recover from the deep sleep mode, press the Wake Up/Sleep button. The printer recovers
automatically when it receives a print job.
Power Off Timer (Power Off mode)
When this setting is set to On, the printer switches into the power off mode at the time specified in the
Time to Off setting. The printer does not enter the power off mode if it is receiving or sending data.
The power off mode consumes about 0.2 W by disabling almost all operations. In the power off mode,
the Wake Up/Sleep button blinks.
The printer recovers from the power off mode at the time specified in the Start setting, or if you
pressed the Wake Up/Sleep button.
Time to Off
Specifies the length of the time until the printer enters the power off mode if there are no button
operations and no jobs to be printed.
Timer Setting
Settings (default in bold)
Cancel Selection, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday,
Sunday
Epson AcuLaser M7000 Series
Using the Control Panel
User's Guide
83