Energy Saver Menu - Epson AcuLaser M7000N series User Manual

Password Config
Changes the password. Enter the old password first and then enter the new password twice.
To enter the password, press the d Down or u Up button to select the character and press the r Right
button to determine the character. After all characters are determined, press the OK button.
Note:
If you forget your password, contact your dealer. Note that when the password is initialized, the settings
and data stored on the printer are deleted. Depending on your environment, settings, such as network
connection settings, may need to be done again. We recommend making a note or backup of the
necessary data and setting information.
Limitation
Changes the restriction range. When Interface is selected, the password is required to change the
settings in the USB and Network menus. When Config is selected, the password is required to enter
Quick Print Job or Confidential Job, or to change the settings in all menus. When All is
selected, the password is required to enter Quick Print Job or Confidential Job, or to change
the settings and to perform the items in all menus. Before changing the setting, you have to enter the
password set in the Password Config setting.

Energy Saver Menu

Item
Time to Sleep
*1 *2
Deep Sleep Mode
Power Off Timer
*1
Time to Off
Timer Setting
*4
Start
*4
Stop
Settings (default in bold)
1, 3, 5, 15, 30, 60, 120, 180, 240Min
On, Off
*3
On, Off
30, 60, 120, 180, 240, 360, 480Min
Off, On
0:00...8:00...23:59
0:00...18:00...23:59
Epson AcuLaser M7000 Series
Using the Control Panel
User's Guide
82