I239X Menu - Epson AcuLaser M7000N series User Manual

Use this option to select one of the thirteen international symbol sets. See the Font Guide for samples of
the characters in each country's symbol set.
Auto CR
Specifies whether the printer performs a carriage-return/line-feed (CR-LF) operation whenever the
printing position goes beyond the right margin. If you select Off, the printer does not print any
characters beyond the right margin and does not perform any line wrapping until it receives a
carriage-return character. This function is handled automatically by most applications.
Auto LF
If you select Off, the printer does not send an automatic line-feed (LF) command with each
carriage-return (CR). If On is selected, a line-feed command is sent with each carriage-return. Select On
if your text lines overlap.
Bit Image
The printer is able to emulate the graphics densities set with the printer commands. If you select Dark,
the bit image density is high, and if you select Light, the bit image density is low.
If you select BarCode, the printer converts bit images to bar codes by automatically filling in any
vertical gaps between dots. This produces unbroken vertical lines that can be read by a bar code reader.
This mode will reduce the size of the image being printed, and may also cause some distortion when
printing bit image graphics.
ZeroChar
Selects whether the printer prints a slashed or unslashed zero.

I239X Menu

The I239X mode emulates IBM
These settings are available only when the printer is in the I239X mode.
Item
Font
Pitch
®
2390/2391 Plus commands.
Settings (default in bold)
Courier, Prestige, Gothic, Orator, Script, Presentor, Sans serif
10, 12, 15, 17, 20, 24cpi, Prop.
Epson AcuLaser M7000 Series
Using the Control Panel
User's Guide
79