Suzuki V-STROM 1050 2022 Manual page 79

MALFUNCTION INDICATOR LIGHT
" "
When the ignition switch is turned ON,
the malfunction Indicator light comes on
for 3 seconds as a lamp check, and
then turns off.
When there is a malfunction in an emis-
sion control device or engine electrical
device, the malfunction indicator light
comes on.
If the malfunction indicator light comes
on, "FI" appears on the multifunction
display at the same time.
For details, see "DIAGNOSIS DISPLAY"
on page 2-45.
NOTE: If the malfunction indicator light
is lit or blinking, consult your Suzuki
dealer immediately.
.
CRUISE CONTROL INDICATOR
LIGHT " " (V-STROM 1050XT)
When the ignition switch is turned ON,
the cruise control indicator light comes
on for 3 seconds as a lamp check, and
then turns off.
The cruise control indicator light indi-
cates the cruise control operation sta-
tus, as follows.
2-28