Suzuki V-STROM 1050 2022 Manual page 130

Setting the cruise control to standby
Press the cruise control switch 1 on
the right handlebar switch assembly
and check that the standby indicator 2
comes on in the cruise control display in
the instrument panel.
The cruise control indicator light 3
comes on at the same time.
Setting the target motorcycle speed
1. When the desired motorcycle speed
is reached while conditions allowing
setting are met, press the select
switch (SET/-) 1 on the left handle-
bar switch to complete setting of the
target motorcycle speed. The motor-
cycle travels at the target motorcycle
speed even if the throttle grip is
turned back.
The SET indicator 2 comes on in
the cruise control display when the
target motorcycle speed is set. The
cruise control indicator light 3
comes on after blinking for 3 sec-
onds.
2-79