Suzuki V-STROM 1050 2022 Manual page 108

NOTE:
• When the battery terminal is discon-
nected and reconnected, be sure to
set the engine rpm indicator light
setting again.
• When the select switch (Up) is
pressed for about 2 seconds while
setting, the setting is terminated and
returns to the "MENU" indication. In
this case, the setting at the time of
termination is adopted.
• The setting is also terminated when
the ignition switch is turned OFF or
the switch is not operated for 10 sec-
onds. In this case, the setting at the
time of termination is adopted.
MODE (lighting mode) setting
Set the lighting mode of the engine rpm
indicator lights using the following pro-
cedure.
1. While "MODE" is selected, press the
select switch (Down) for about 2 sec-
onds to move to the setting screen.
2-57
2