Replacing The Main Cooling Fan, Frame R5 - ABB ACS560 Hardware Manual

￭

Replacing the main cooling fan, frame R5

WARNING!
Obey the instructions in chapter
instructions can cause physical injury or death, or damage to the equipment.
1. Stop the drive and disconnect it from the power line. Wait for 5 minutes and
then make sure by measuring that there is no voltage. See section
safety precautions (page 18)
2. Lift the fan assembly upwards from the front edge (2a) and remove the
assembly (2b).
3. Unplug fan power supply wires from the drive.
4. Install the new fan assembly in reverse order.
Maintenance and hardware diagnostics 133
Safety instructions (page
before you start the work.
15). Ignoring the
Electrical