ABB ACS560 Hardware Manual page 26

26 Introduction to the manual
Term/ Description
Abbrevi-
ation
BIO-01 Optional I/O extension module. Can be installed to the drive together with
a fieldbus adapter module.
Brake chop- Conducts the surplus energy from the intermediate circuit of the drive to the
per brake resistor when necessary. The chopper operates when the DC link voltage
exceeds a certain maximum limit. The voltage rise is typically caused by de-
celeration (braking) of a high inertia motor.
Brake resist- Dissipates the drive surplus braking energy conducted by the brake chopper
or to heat
BREL Optional relay output extension module
DC link DC circuit between
DC link capa- Energy storage which stabilizes the intermediate circuit DC voltage
citors
DPMP Optional mounting platform for door mounting of control panel
DPMP-01 Mounting platform for control panel (flush mounting)
DPMP-02, Mounting platform for control panel (surface mounting)
DPMP-03
EFB Embedded fieldbus
FBA Fieldbus adapter
FCAN Optional CANopen® adapter module
FCNA-01 Optional ControlNet™ adapter module
FECA-01 Optional EtherCAT® adapter module
FENA-01 Optional Ethernet adapter module for EtherNet/IP™, Modbus TCP and
PROFINET IO protocols
FENA-11 Optional Ethernet adapter module for EtherNet/IP™, Modbus TCP and
PROFINET IO protocols
FENA-21 Optional Ethernet adapter module for EtherNet/IP™, Modbus TCP and
PROFINET IO protocols, 2-port
FPBA-01 Optional PROFIBUS DP® adapter module
Frame, Physical size of the drive or power module
frame size
IGBT Insulated gate bipolar transistor
Intermedi- DC circuit between rectifier and inverter
ate circuit