Start-Up; Technical Data - ABB ACS560 Hardware Manual

224 Optional panel bus adapters and extension modules
Do not chain an external 24 V DC power supply to several drives. Each drive must
be powered by a single 24 V DC power supply, or a separate 24 V DC output of one
auxiliary power source.
1
24VDC (+)
GND (-)
1 External power supply
2 Drive
3 +24 V internal
4 Main power supply
5 +5 V internal
￭

Start-up

To configure the BAPO-01 module:
1. Power up the drive.
2. Set the parameter 95.04 Control board supply to 1 (External 24V) .
￭

Technical data

Voltage and current rating for the auxiliary power supply: +24 V DC ±10%, max.
1000 mA (including internal fan load).
Power loss: Power losses with maximum load 4 W.
2
+24V
DGND
3
4
BAPO-01
5