Setting Up Remote Routers For Ip Telephony Prioritization; Creating An Outbound Traffic Filter - Nortel VoIP Gateway Configuration Manual

184

Setting up Remote Routers for IP Telephony Prioritization

Setting up Remote Routers for IP Telephony Prioritization

This section includes information about setting up earlier version of BayStack routers and how to
set up a range of UDP as a high priority.
Note: The information in this section is not required for recent versions of the Nortel
Networks routers, such as BayRS release 15, that support prioritization based on the
DiffServ Code Point (DSCP).

Creating an outbound traffic filter

To create an outbound traffic filter:
1 In the Configuration Manager window, click Circuits and then click Edit Circuits.
The Circuit List window appears.
2 Select a circuit.
3 Click the Edit button.
The Circuit Definition screen appears with the circuit you selected highlighted.
4
On the Protocol menu, click Add.
5
Select the protocol priority from the list.
6
Click the OK button.
7 Click Protocols, Edit Protocol Priority, and then click Priority/Outbound Filters.
The Priority/Outbound Filters window appears.
8 Click Template.
The Filter Template Management window appears.
9 Enter the template name and click Create.
The Create Priority/Outbound Template window appears.
10 Type a descriptive name in the Filter Name field.
11 Click Criteria, Add, Datalink, IP, and then click Criterion.
The Add Range window appears. If you choose the User-Defined criterion, the Add
User-Defined Field window appears first.
12 Type a minimum and maximum value to specify the range, and then click the OK button.
The Add Range window closes. The new criterion and ranges now appear in the Filter
Information field of the Create Priority/Outbound Template window.
13 Click Action, Add and then click action.
14 Click the OK button.
The Filter Template Management window opens. The new template appears in the templates
list.
P0606298 02