Table of Contents
Advertisement
Figure 25 Example of Channels - Hunt Group settings for dedicated lines
Entries for:
Joe's first line
Joe's second line
Christine's line
Mary's line
•
On the Caller Display Info screen, enter the name of the person to whom the line is dedicated.
Using the previous example, the Caller Display Info screen would look like
Figure 26 Example of Caller Display Info settings for dedicated lines
•
On the IP to Hunt Group Routing Table screen, configure a Hunt Group for each unique
destination. Allow only those numbers that uniquely identify the destination to terminate in
that Hunt Group. Exactly what these numbers are depends on what types of calls are sent to the
VoIP Gateway over IP.
example above.
Figure 27
shows a sample IP to Hunt Group Routing Table for the
Configuring your Norstar KSU
Norstar VoIP Gateway Configuration Guide
115
Figure
26.
- Quick Links:
- About Norstar Voip Gateway
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
