Example Configurations - Nortel VoIP Gateway Configuration Manual

Example configurations

This section provides examples for the following:
• "Configuring a simple Norstar network" on page 118
• "Setting up the VoIP Gateway to enable end to end DTMF tones" on page 125
• "Setting up the VoIP Gateway to use a RAD over VoIP trunks" on page 126
• "Setting up the VoIP Gateway for T.38 Fax Relay" on page 127
• "Setting up the VoIP Gateway to use a Radvision Gatekeeper" on page 129
• "Configuring the Business Communications Manager as an endpoint" on page 130
• "Considerations when using a Meridian 1 IPT" on page 131
• "Considerations when using a CSE1K Gatekeeper" on page 131
Example configurations
Norstar VoIP Gateway Configuration Guide
117