Figure 19 Installing A Dimm - Nortel 600 Installing

6
Pull the DIMM out of the slot.
7
Insert the new DIMM into the slot at a 45 degree angle
Use the alignment keys on the DIMM to properly position the DIMM in the
connector.

Figure 19 Installing a DIMM

Socket keys
8
Gently press down on the DIMM until it is locked into position by the locking
levers.
9
Slide the chassis into the steel enclosure (see
10 Replace the 4 Phillips screws that secure the bottom panel to the chassis (see
Figure 12 on page
11 Reconnect the network cables.
12 Reconnect the power cord to restart the Contivity 600.
Chapter 4 Installing option cards and DIMMs 55
Motherboard
Alignment keys
47).
(Figure 19).
CS60008A
Figure 18 on page 53).
Installing the Contivity 600