Installing Binary Images - Bay Networks 5000 Installation Manual

Installing Binary Images

Next the script offers you three ways to load and compile the binary
images.
Binary images exist for this host. You should have a
C compiler so you could install source code and compile
it. The recommended option is to install binary images
only.
Available installation options are:
1. Install binary images only (15MB)
2. Install source code only, but do not compile (19MB)
3. Get both binary images and source code, but do not
compile (22MB)
4. Quit
Enter installation choice [1]:
1. Enter 1 for a normal installation.
To continue with this installation you need 15 MB of
disk space in directory /usr/annex/ra_R14.0. Please
ensure that this disk space is available.
You may quit the installation or you may escape to a
shell now to free up disk space and then continue with
this installation (to do this answer "!" at the prompt
below).
Are you ready to continue (y/q=quit) [y]:
2. Press Return to continue.
1) 3Com 6117C-XS
3Com 6133C-XS
Model 5390 Communications Server
Cabletron CSMIMII
Remote Annex 4000
2) Remote Annex 5391/CT1
Cabletron CSMIM-T1
Remote Annex 6100
3) Cabletron Micro CS
Installing Remote Access Concentrator Software for UNIX
Chapter 2 Installing the Software
2-7