Installing The Software And Operational Images - Bay Networks 5000 Installation Manual

3. The script then prompts for the software product you are
loading.
After installing one product you will be asked if you
want to install the other product.
Indicate desired action:
1) Install Annex Software
2) Install Annex Manager
3) Quit
Enter desired action [1]:
At this point, you can continue the software installation, install only
Annex Manager, or quit the session.

Installing the Software and Operational Images

The first step in the software installation is to name the directories in
which the script installs the RAC resources, utilities and operating
images. If you choose option 1 from the main menu above, the script
displays the following:
For the installation to proceed, we must copy software
to a directory on a hard disk on the host. Please enter
the name of the directory to be used.
Enter the name of the Annex Software installation
directory. Directory name [/usr/annex/ra_R14.1]:
1. If you choose to accept the default, press Return; otherwise
enter a path name.
After you choose a directory, the script displays:
Annex Software Installation Script
This installation shell script will examine your system
and possibly ask you questions to generate the needed
configuration to allow you to compile the Annex host
utilities.
You can abort the script at any time and restart it
without any ill effects. Once the install completes
the configuration section, you will need to use
Installing Remote Access Concentrator Software for UNIX
Chapter 2 Installing the Software
2-3