Starting Annex Manager; Starting Erpcd - Bay Networks 5000 Installation Manual

Chapter 3 Setting Environment Services

Starting Annex Manager

Starting erpcd

Installing Remote Access Concentrator Software for UNIX
3-2
To start Annex Manager, enter:
gui_am
This command can be incorporated into the shell start-up scripts.
If you are maintaining a previous version of Annex Manager for use with
RACs not running R14.0 or R13.3, you must reset the GUI_AM_DIR
variable to the older version's installation directory and then start the
Annex Manager from the appropriate /bin directory.
If you installed the supplied binary files in directories other than the default
selections, you must use the –f and –s switches to redirect erpcd to the other
directories. The –f switch identifies where the software utilities are installed;
the –s switch identifies the operating images file.
erpcd –f < utilities directory > –s < operating images file >
For example, if you loaded the utilities in /usr/annex/util and the
operating images in /usr/annex/boot, start erpcd with this command:
erpcd –f /usr/annex/util –s /usr/annex/boot