Specifying Access Privileges - Bay Networks 5000 Installation Manual

The script displays information about the variable GUI_AM_DIR. If
the script detects a previous version of GUI_AM_DIR, it displays the
following message:
Beginning Annex Manager R3.1 Installation
The environment variable GUI_AM_DIR is set to '/usr/
annex'. The installation script will merge data from
the current installation (unknown) in '/usr/annex'
into the installation directory, 'usr/annex/
gui_am_R3.0'.
If this is correct press 'c' to continue. Otherwise,
- abort by pressing 'a'
- make the necessary changes for your correct
installation
- restart the installation process
Continue (c/a)
3. Press c to continue, or a to abort and make changes.
The script detects your operating system.
The installation program has detected that you are
currently running the SunOS operating system.
Is this correct (y/n) [y]
4. Verify the identification by pressing the Return key.
Now the script addresses Annex Manager access privileges.

Specifying Access Privileges

The script prompts you for access privileges. By default, the owner is
root and the group id is bin.
The installation program will change the ownership of
Annex Manager files to root.
Only owners of certain configuration files may modify
those files.
To have the installation script change the ownership
to another user id, enter the username now or press
return to accept root.
Enter Username [root]:
The installation program will change the group id of
Annex Manager files and directories to group 'bin'.
Only members of this group can add data files.
Installing Remote Access Concentrator Software for UNIX
Chapter 2 Installing the Software
2-13