Chapter 2
Installing the Software
Beginning the Installation
Installing Remote Access Concentrator Software for UNIX
2-2
1.
Start the installation script by typing:
./install
The script displays a welcome message:
***************************************************
It is required that you run this script as root.
***************************************************
This command is used to install RAC host tools (boot
images, security, command line management) and Annex
Manager (X-Motif GUI management application). The
versions that will be installed are:
Annex Software
Annex Manager
Support for the following hardware platforms is
included in this release:
Platform
RA6300
5393
5399
8000RAC
RA2000
RA4000
5390
5391
RA6100
At any question prompt you can escape to a shell by
typing "!". When you exit that shell you will bounce
back to the prompt. Many of the questions will have
default answers in square brackets; pressing carriage
return will select the default.
Do you want to continue (y/n/q=quit) [y]:
Return
2.
Press the
The installation script main menu appears.
R14.1
R3.1
Software version
R14.1.28
R14.1.28
R14.1.28
R14.1.28
R14.1.28
R14.1.28
R14.1.28
R14.1.28
R14.1.28
key to continue.