Nortel CallPilot Server User Manual page 19

tower/rackmount server integrated with CS 1000
CS 1000 network setup
In the previous illustrations, the telephony LAN (TLAN) provides IP
connectivity between the CS 1000 system and the i2004 Internet phonesets.
The connection between the Call Server and Media Gateway can be
point-to-point, or it can be through the LAN, if the system is installed in
a distributed data network.
For information about the CS 1000 system and i2004 Internet phoneset
bandwidth and network requirements, see the Communication Server
1000S: Installation and Configuration
For a description of each CS 1000 system component, see
Gateway" (page
CallPilot components
CallPilot server
The CallPilot server connects to the CS 1000 system and, where desktop
messaging is enabled, to the Nortel Server Subnet (NS Subnet). If your
server is a 201i server, it resides inside the CS 1000 system.
MGate card (NTRB18CA) -- tower and rackmount servers only
The MGate card (NTRB18CA) is a line card that is installed inside the CS
1000 system. The MGate card sends the voice and data signals to the
MPB boards in the CallPilot server.
Copyright © 2007, Nortel Networks
.
Note: The above diagram shows a tower server. However, the same
configuration applies to a rackmount server.
20).
Nortel CallPilot
Communication Server 1000 and CallPilot Server Configuration
NN44200-312 01.02 Standard
5.0 3 May 2007
CallPilot and CS 1000 integration 19
"CS 1000 Media