Connecting Communications Cables Vpn Router 600; Table 2 Interfaces And Cables For The Vpn Router 600 - Nortel 600 Installation Manual

30 Chapter 2 Cabling the VPN Router and turning the power on

Connecting communications cables VPN Router 600

Gather the cables that you must attach to the VPN Router 600.
Table 2
cards that you can install in the VPN Router 600. The table also indicates whether
you can obtain cables for the ports from Nortel.

Table 2 Interfaces and cables for the VPN Router 600

Interface
10/100BASE-TX Ethernet system port
Serial port
10/100BASE-TX Ethernet
1000BASE-T (1000 GT) Ethernet
56/64K CSU/DSU WAN
ADSL WAN
ISDN BRI
V.90 modem
T1/E1 CSU/DSU WAN
Single V.35/X.21 WAN
1 Order either the V.35 cable or the X.21 cable.
For information about the connectors and cable pinouts, see
"Technical specifications," on page
Figure 2 on page 31
and the power cord attach to the rear of the gateway.
NN46110-308 02.01
lists the system ports and the ports provided on the optional interface
Cable available from Nortel
Included
X
X
X
shows the back of the VPN Router 600. All interface cables
Ordered separately
X
1
71.
Contact supplier
X
X
X
X
X
X
Appendix A,