Connecting Communications Cables; Table 2 Interfaces And Cables For The Nortel Vpn Router 2750 - Nortel VPN Router 2750 Installation Manual

36 Chapter 2 Cabling the VPN Router and turning the power on

Connecting communications cables

Gather the cables to attach to the VPN Router 2750.
Table 2
cards that you can install in the VPN Router 2750. The table also indicates
whether you can obtain cables for the ports from Nortel.

Table 2 Interfaces and cables for the Nortel VPN Router 2750

Interface
10/100BASE-TX Ethernet system ports
Serial port
10/100BASE-TX Ethernet
1000BASE-T (1000 GT) Ethernet
1000BASE-T (1000 MT) Ethernet
(copper)
1000BASE-SX Ethernet (fiber)
56/64K CSU/DSU WAN
ADSL WAN
ISDN BRI
V.90 modem
T1/E1 CSU/DSU WAN
Quad T1/E1 CSU/DSU WAN
Single V.35/X.21 WAN
HSSI WAN
1 Order either the LC-to-LC cable or the LC-to-SC cable.
2 Order either the V.35 cable or the X.21 cable.
For information about the connectors and cable pinouts, see
"Technical specifications," on page
NN46110-318 02.01
lists the system ports and the ports provided on the optional interface
Cable available from Nortel
Included
X
X
X
X
Ordered separately
X
1
X
2
77.
Contact supplier
X
X
X
X
X
X
X
X
Appendix A,