1000Base-T (1000 Gt) Ethernet Interface Card Leds; Figure 6 Leds On The 1000Base-T (100 Gt) Ethernet Interface Card; Table 7 Led Indicators On The 1000Base-T (100 Gt) Ethernet Interface Card - Nortel 600 Installation Manual

1000BASE-T (1000 GT) Ethernet interface card LEDs

The following figure shows the LEDs on the 10BASE-T/100BASE-TX/
1000BASE-T Ethernet interface card.
Note: The 1000BASE-T (100 GT) Ethernet interface card can only
operate at 10/100 Mbit/s on the VPN Router 600.

Figure 6 LEDs on the 1000BASE-T (100 GT) Ethernet interface card

The following table describes the LEDs on the1000BASE-T (100 GT) Ethernet
interface card.

Table 7 LED indicators on the 1000BASE-T (100 GT) Ethernet interface card

LED
ACT/LINK
10/100/1000
Chapter 2 Cabling the VPN Router and turning the power on 37
Indicator Description
Steady green The port is connected to a valid link partner.
Flashing green The card is sending or receiving network data. The
frequency of the flashes increases with increased
traffic.
Off The card is not sending or receiving data.
Green The port is operating at 100 Mb/s.
Off The port is operating at 10 Mb/s.
Nortel VPN Router Installation — VPN Router 600