Table of Contents
Advertisement
62 Chapter 4 Installing option cards and DIMMs
To replace the DIMM in the VPN Router 600:
1
2
3
4
5
6
7
NN46110-308 02.01
Shut down the VPN Router 600 using the Web GUI or the CLI, and then
unplug it as described in
hardware" on page
52.
Warning: Risk of electric shock
Turn off the VPN Router 600 and unplug it before you attempt to replace
the DIMM.
Remove the chassis from the steel enclosure (see
Router 600" on page
Attach an antistatic wrist strap.
Caution: Risk of equipment damage
Electrostatic discharge can damage VPN Router 600 components.
Locate the DIMM slot on the system board
Pull the locking levers back to release the DIMM.
The DIMM snaps up from the circuit board.
Pull the DIMM out of the slot.
Insert the new DIMM into the slot at a 45 degree angle
Use the alignment keys on the DIMM to properly position the DIMM in the
connector.
"Shutting down the system to add or replace
52).
"Opening the Nortel VPN
(Figure 13 on page
55).
(Figure
18).
Advertisement
Table of Contents
